top of page
METAL PALLET RACKS
1
Description
Different needs, a solution. Iron Fist represents the new generation of pallet racks. The pallet rack is obtained by assembling only two basic elements, frames and beams, by simple interlocking and without resorting to bolts, joints or other components.
The frames are the vertical elements of the structure and are formed by uprights, diagonals and cross bars; the beams are the horizontal elements and constitute the support of the pallets. The beams are
the result of a research project aimed at achieving the maximum capacity and highest quality and are produced with the latest technologies.
The coupling between the two profiles allows to obtain double thickness in the points where the beam is more stressed and the exclusive tightening of the two profiles ensures the perfect collaboration between the coupled sides, thus avoiding sliding between the parts without the need for welding points along the whole axis.
The new frame cross bracings allows a symmetrical distribution of the stresses on the uprights, leading to a greater resistance of the frame. The uprights have been designed for all possible pallet loads and
also to withstand seismic stresses. The improvement of the upright-beam connection allows an increase in rigidity and stability of the entire structure, thanks also to the high quality of the raw materials used and to the attention to details.
2
Advanatges
The pallet racks could handle a load capacity up to 30,000 kg per bay and up to 4,500 kg per pair of beams.
Beams and uprights provide a perfect combination for stability and safety.
Configure the warehouse according to your needs. Secure, robust, durable and easy to assemble, Iron Fist is the ultimate solution for pallets storage.
2.1
STURDINESS
The connection between beam and upright is ensured by the exclusive “U” clutch with conic inclination of III° that increase beams and frames charge capacity. Safety and resistance are subsequently strengthened by the welded bracket that allows to vary the number of teeth to better improve the several charge capacities. The no sliding static resistance, tested against oscillations, gives stability and seismic performances to the full structure.
A small detail that makes a difference: it eliminates the co-existence of empty carvings that might weaken the upright capacity, it harmonizes the steel consistence through the full element, it keeps the edges free from perforations in order to guarantee the highest load capacity and bumps resistance.
2.2
SAFETY
One of the best beam with the highest performance on the market: it withstands twice the declared load. High reliability and safety in little more than one millimeter of thickness.
Increased dynamic resistance to shocks during handling of goods.
Absence of sharp edges.
Highly visible Violet coloring which is different from other conventional colors used for signalization (red= hot water or superheated steam, green = acids, orange = chlorinated tube etc…)
2.3
RESISTANCE TO EXTERNAL AGENTS
Uprights with Z200 galvanized zinc coating, better than the market average Z100. This gives maximum protection even on the cutting area thanks to an excellent effect of galvanize dragging.
The upright special folds conformation involves a greater steel quantity in comparison to the actual productive standards, enhancing the resistance of the upright.
2.4
COMPETITIVENESS
Best rating between charge capacity and price: high performances, great convenience. Absence of welding on the whole axle of the profile thanks to the special embossing of the external wing. The joining and the tightening of the two profiles has been conceived to get a double thickness in the parts with the biggest load.
The uniform load distribution on the uprights optimizes the frame load capacity in a significantly way.
More liberty and versatility of use in the warehouse. Remarkable increase of loading charge in seismic areas.
Reduction of the number of variants, thanks to the interchangeability of the beam against the measures of the upright. This implies reducing stock levels and therefore reducing costs, as well as the possibility
for the customer to reuse the beams even in case of a change of uprights dimensions.
Beams pitch for vertical adjustment is 50mm
2.5
INSTALLATION & DELIVERY
Special conformation of the fixing bolt, self-locking with a square head, for a quick block when approaching the nut (elastic stop).
A wide range of frames and beams is available with prompt delivery.
3
Accessories
-
Shelves
-
Secondary bean
-
Third beam
-
Open plank surface
-
Grid Shelves
-
Upright protection
-
Beam C head Protection
-
UPN Profile head protection
-
Fall protection mesh
-
Loading bays
-
Contrast rails
-
Tubular stop
-
Mesh shelvesd
4
COLORS
The metal pallet rack comes in the following colors:
STANDARD
Galvanized / Magenta RAL 4003
Available on request
Galvanized / Blue RAL 5010
Galvanized /White RAL 9010
Galvanized / Metallic Aluminum RAL 9006
Galvanized / Yellow RAL 1021
Galvanized / Grey RAL 7038
Galvanized / grey RAL 7026
Galvanized / Orange RAL 2004
SPECIAL COLOURS (WITH A MINIMUM ORDER)
Galvanized / RAL Color
5
Certified quality for our pallet racks
Diagonals and Horizontals
The steel used for making diagonals and horizontals is of a certified structural type S250 GD, with a minimum unit yield strength of 250 N/mm2. The product is obtained by galvanized coils through profiling.
Foot plates
The steel used for making the foot plates is of a certified structural type S250 GD, with a minimum unit yield strength of 250 N/mm2. The product is obtained by pickled coils with a pressing process and then galvanizing.
Beams
The steel used for making the beams is of a certified structural type S355 MC, with a minimum unit yield strength of 355 N/mm2. The product is obtained by coils through profiling and then seaming.
Uprights
The steel used for making the uprights is o a certified structural type S350 GD, with a minimum unit yield strength of 350 N/mm2. The product is obtained by galvanized coils through pressing and cold roll forming process.
bottom of page